Mechanical & Aerospace Engineering Publications

Friday, July 1, 2016

Sickle Cell Disease Biochip: a functional red blood cell adhesion assay for monitoring sickle cell disease

Alapan, Y., Kim, C., Adhikari, A., Gray, K., Gurkan Cavusoglu, E., Little, J., ... Gurkan, U. (2016). Sickle Cell Disease Biochip: a functional red blood cell adhesion assay for monitoring sickle cell disease. Transl Res, 173 (), 74 - 91.

Friday, July 1, 2016

Laboratory evaluation of Nomex IIIA aramid fabric as a flammability barrier material in a variable oxygen and pressure atmosphere, ICES-2016-38, 46th International Conference on Environmental Systems

Tien, J. S., & T'ien, J. (2016). Laboratory evaluation of Nomex IIIA aramid fabric as a flammability barrier material in a variable oxygen and pressure atmosphere, ICES-2016-38, 46th International Conference on Environmental Systems. 46th International Conference on Environmental Systems, ICES-2016-38 ().

Wednesday, June 29, 2016

Deriving Characterization Factors on Freshwater Ecotoxicity of Graphene Oxide Nanomaterial for Life Cycle Impact Assessment

Yuan, C. (2016). Deriving Characterization Factors on Freshwater Ecotoxicity of Graphene Oxide Nanomaterial for Life Cycle Impact Assessment. , ().

Monday, May 30, 2016

Optimizing the process efficiency of atomic layer deposition of alumina for its sustainability improvement: a combined experimental and modeling study

Xie, Y., Pan, D., Ma, L., & Yuan, C. (2016). Optimizing the process efficiency of atomic layer deposition of alumina for its sustainability improvement: a combined experimental and modeling study. Journal of Cleaner Production , 133 (1), 338–347.

Monday, May 16, 2016

Catadioptric Stereo Tracking for Three Dimensional Shape Measurement of MRI Guided Catheters

Cavusoglu, M. C. (2016). Catadioptric Stereo Tracking for Three Dimensional Shape Measurement of MRI Guided Catheters. , ().

Sunday, May 1, 2016

Microstructure and Mechanical Properties of Ti-48Al-2Cr-2Nb Produced via Electron Beam Melting

Seifi, M., Ghamarian, I., Samimi, P., Ackelid, A., Collins, P., & Lewandowski, J. J. (2016). Microstructure and Mechanical Properties of Ti-48Al-2Cr-2Nb Produced via Electron Beam Melting. TMS-International Conference on Ti Alloys, (), 1317-1322.

Sunday, May 1, 2016

Process Mapping and Fracture and Fatigue Behavior of Ti-6Al-4V made by Additive Manufacturing

Seifi, M., Christiansen, D., Harrysson, O., Beuth, J., & Lewandowski, J. J. (2016). Process Mapping and Fracture and Fatigue Behavior of Ti-6Al-4V made by Additive Manufacturing. TMS-International Conference on Ti Alloys, (), 1371-1377.

Tuesday, March 15, 2016

3D Dual-Confined Sulfur Encapsulated in Porous Carbon Nanosheets and Wrapped with Graphene Aerogels as Cathode for Advanced Lithium Sulfur Batteries

Hou, Y., Li, J., Gao, X., Wen, Z., Yuan, C., & Chen, J. (2016). 3D Dual-Confined Sulfur Encapsulated in Porous Carbon Nanosheets and Wrapped with Graphene Aerogels as Cathode for Advanced Lithium Sulfur Batteries. Nanoscale, 8 (), 8228 - 8235.

Sunday, March 13, 2016

Numerical Simulation of Flame Splitting Phenomenon in Concurrent Flame Spread over Thin Solid Fuel with Two-Stage Pyrolysis

Li, C., & Liao, Y. T. (2016). Numerical Simulation of Flame Splitting Phenomenon in Concurrent Flame Spread over Thin Solid Fuel with Two-Stage Pyrolysis . 2016 Eastern State Session Combustion Institute Spring Meeting, ().

Sunday, March 13, 2016

Numerical Study of Upward Flame Spread over Discrete Fuels

Park, J., & Liao, Y. T. (2016). Numerical Study of Upward Flame Spread over Discrete Fuels. 2016 Eastern State Session Combustion Institute Spring Meeting, ().

Sunday, March 6, 2016

An Optimal Design Analysis of a Novel Parabolic Trough Lighting and Thermal System

Li, T., & Yuan, C. (2016). An Optimal Design Analysis of a Novel Parabolic Trough Lighting and Thermal System. International Journal of Energy Research , 40 (9), 1193–1206.

Tuesday, March 1, 2016

Overview of Materials Qualification Needs for Metal Additive Manufacturing

Seifi, M., Salem, A., Beuth, J., Harrysson, O., & Lewandowski, J. J. (2016). Overview of Materials Qualification Needs for Metal Additive Manufacturing. JOM, 68 (3), 747-764.

Tuesday, March 1, 2016

Gamma Radiation Sterilization Reduces the High-cycle Fatigue Life of Allograft Bone.

Islam, A., Chapin, K., Moore, E., Ford, J., Rimnac, C. M., & Akkus, O. (2016). Gamma Radiation Sterilization Reduces the High-cycle Fatigue Life of Allograft Bone.. Clinical orthopaedics and related research, 474 (3), 827-35.

Tuesday, March 1, 2016

Fundamentals, Properties and Applications Volume 2: Applications of Hydrogels in Regenerative Medicine

Gurkan, U. (2016). Fundamentals, Properties and Applications Volume 2: Applications of Hydrogels in Regenerative Medicine. World Scientific, ().

Monday, February 1, 2016

Deformation Rate and Sensitization Effects on Environmentally Assisted Cracking

Seifi, M., Holroyd, H., & Lewandowski, J. J. (2016). Deformation Rate and Sensitization Effects on Environmentally Assisted Cracking. Corrosion, 72 (2), 264-283.

Wednesday, January 27, 2016

Nondestructive Techniques to Evaluate the Characteristics and Development of Engineered Cartilage.

Mansour, J. M., Lee, Z., & Welter, J. (2016). Nondestructive Techniques to Evaluate the Characteristics and Development of Engineered Cartilage.. Annals of biomedical engineering, ().

Monday, January 25, 2016

Effects of gap size, temperature and pumping pressure on the fluid dynamics and chemical kinetics of in-line spatial atomic layer deposition of Al2O3

Pan, D., Ma, L., Xie, Y., Jen, T., & Yuan, C. (2016). Effects of gap size, temperature and pumping pressure on the fluid dynamics and chemical kinetics of in-line spatial atomic layer deposition of Al2O3. International Journal of Heat and Mass Transfer , 96 (), 189-198.

Monday, January 18, 2016

Needle Grasp and Entry Port Selection for Automatic Execution of Suturing Tasks in Robotic Minimally Invasive Surgery

Cavusoglu, M. C. (2016). Needle Grasp and Entry Port Selection for Automatic Execution of Suturing Tasks in Robotic Minimally Invasive Surgery. , ().

Monday, January 18, 2016

Band Gap Opening and Semiconductor-metal Phase Transition in (n, n) Single-Walled Carbon Nanotubes with Distinctive Boron-Nitrogen Line Defect

Qiu, M., Xie, Y., Gao, X., Li, J., Deng, Y., Guan, D., ... Yuan, C. (2016). Band Gap Opening and Semiconductor-metal Phase Transition in (n, n) Single-Walled Carbon Nanotubes with Distinctive Boron-Nitrogen Line Defect. Physical Chemistry Chemical Physics , 18 (), 4643-4651.

Wednesday, January 13, 2016

Corrosion-Resistant Alloys: Case Hardening

Heuer, A. H., Ernst, F., Collins, S., Natishan, P., & Kahn, H. (2016). Corrosion-Resistant Alloys: Case Hardening. CRC Press, (), 947-962.

Friday, January 1, 2016

A multiscale and multiphysics model of strain development in a 1.5 T MRI magnet designed with 36 filament composite MgB 2 superconducting wire

Amin, A., Baig, T., Deissler, R., Yao, Z., Tomsic, M., Doll, D., ... Martens, M. (2016). A multiscale and multiphysics model of strain development in a 1.5 T MRI magnet designed with 36 filament composite MgB 2 superconducting wire. Superconductor Science and Technology [09532048], 29 (5).

Friday, January 1, 2016

Case School of Engineering

Mechanical & Aerospace Engineering

Mechanical & Aerospace Engineering Publications

Sickle Cell Disease Biochip: a functional red blood cell adhesion assay for monitoring sickle cell disease

Laboratory evaluation of Nomex IIIA aramid fabric as a flammability barrier material in a variable oxygen and pressure atmosphere, ICES-2016-38, 46th International Conference on Environmental Systems

Deriving Characterization Factors on Freshwater Ecotoxicity of Graphene Oxide Nanomaterial for Life Cycle Impact Assessment

Optimizing the process efficiency of atomic layer deposition of alumina for its sustainability improvement: a combined experimental and modeling study

Catadioptric Stereo Tracking for Three Dimensional Shape Measurement of MRI Guided Catheters

Microstructure and Mechanical Properties of Ti-48Al-2Cr-2Nb Produced via Electron Beam Melting

Process Mapping and Fracture and Fatigue Behavior of Ti-6Al-4V made by Additive Manufacturing

3D Dual-Confined Sulfur Encapsulated in Porous Carbon Nanosheets and Wrapped with Graphene Aerogels as Cathode for Advanced Lithium Sulfur Batteries

Numerical Simulation of Flame Splitting Phenomenon in Concurrent Flame Spread over Thin Solid Fuel with Two-Stage Pyrolysis

Numerical Study of Upward Flame Spread over Discrete Fuels

An Optimal Design Analysis of a Novel Parabolic Trough Lighting and Thermal System

Overview of Materials Qualification Needs for Metal Additive Manufacturing

Gamma Radiation Sterilization Reduces the High-cycle Fatigue Life of Allograft Bone.

Fundamentals, Properties and Applications Volume 2: Applications of Hydrogels in Regenerative Medicine

Deformation Rate and Sensitization Effects on Environmentally Assisted Cracking

Nondestructive Techniques to Evaluate the Characteristics and Development of Engineered Cartilage.

Effects of gap size, temperature and pumping pressure on the fluid dynamics and chemical kinetics of in-line spatial atomic layer deposition of Al2O3

Needle Grasp and Entry Port Selection for Automatic Execution of Suturing Tasks in Robotic Minimally Invasive Surgery

Band Gap Opening and Semiconductor-metal Phase Transition in (n, n) Single-Walled Carbon Nanotubes with Distinctive Boron-Nitrogen Line Defect

Corrosion-Resistant Alloys: Case Hardening

A multiscale and multiphysics model of strain development in a 1.5 T MRI magnet designed with 36 filament composite MgB 2 superconducting wire

Journal of Operative and Esthetic Dentistry Volume 1, Issue 1, March 2016, Pages 1–5

STABILITY OF GAS CORE OF CYCLONIC TWO-PHASE SEPARATOR IN MICROGRAVITY

Fatigue and fracture of wires and cables for biomedical applications

A Hydraulic Hybrid Neuroprosthesis for Gait Restoration in People with Spinal Cord Injuries

Pages